Related
Grant 128 imagine Kubuntu Desktop 18.04, Tower Lubuntu desktop 18.04, laptop Windows 10, laptop Kubuntu I installed and configured the samba server by following Installing and configuring Samba in Ubuntu 18.04 Bionic Beaver My addition /etc/smb.conf: [kubuntu_
xilix I have two notebooks on my home network (Notebook 1 with Ubuntu 10.04 and Notebook 2 with Ubuntu 10.10) and I want to share a folder on Notebook 1 with samba. Notebook 2 should be able to read/write/delete the contents of the folder. I installed samba an
Bacon Tape For the life of me, I can't figure this out. I have a NAS (Netgear ReadyNAS) that shares open/guest Samba shares. Anonymous access is allowed, with no user restrictions. I can connect and read/write shares via Windows. My Ubuntu server can also moun
Matt McCormick I have an external HD mounted in NTFS that can be shared from my router. Here is my fstab entry to mount in Ubuntu: // rt-n66u-8fe8 / data / mnt / rt-n66u-8fe8 / data cifs guest，_netdev，uid = matt，gid = matt，rw，dir_mode = 0777，file_mode = 0666 0
Matt McCormick I have an external HD mounted in NTFS that can be shared from my router. Here is my fstab entry to mount in Ubuntu: // rt-n66u-8fe8 / data / mnt / rt-n66u-8fe8 / data cifs guest，_netdev，uid = matt，gid = matt，rw，dir_mode = 0777，file_mode = 0666 0
Pico I have an Ubuntu server running samba at home. I'm trying to set up a samba share where everyone has read and write access. I have all users in the 'sambashare' UNIX group and want to make the directory /data/shared available to all members of the 'sambas
the_meter413 I'm trying to setup a Samba share that can only be accessed by a specific user. I want this user to have read/write access to all files in the share. The smb.conf file below will allow me to access the share through one user "patrick", but cannot
the_meter413 I'm trying to setup a Samba share that can only be accessed by a specific user. I want this user to have read/write access to all files in the share. The smb.conf file below will allow me to access the share through one user "patrick", but cannot
Sergio Fernandez I have a file loaded in R that I want to move to a samba share like write(some-file, file = "|smbclient -U user //ip password") It connects to samba, but (I think) the output is "executed" in, smb: \>and I don't want the file to be executed, I
Sergio Fernandez I have a file loaded in R that I want to move to a samba share like write(some-file, file = "|smbclient -U user //ip password") It connects to samba, but (I think) the output is "executed" in, smb: \>and I don't want the file to be executed, I
xq10907 After upgrading centos to 7.4, I can't access my samba share, samba version is upgraded to 4.6.2, I join centos to windows domain via realm command, domain user (in the format username@doaminname) can log in to centos and pass it with Domain user for k
gimmick I have three shared folders in my local home directory, that is, on /home/me/ on my Ubuntu desktop. All of these are set using "Share Options" in Nautilus' right-click menu. The standard Music and Videos folders are configured the same: the "Guest Acce
gimmick I have three shared folders in my local home directory, that is, on /home/me/ on my Ubuntu desktop. All of these are set using "Share Options" in Nautilus' right-click menu. The standard Music and Videos folders are configured the same: the "Guest Acce
xq10907 After upgrading centos to 7.4, I can't access my samba share, samba version is upgraded to 4.6.2, I join centos to windows domain via realm command, domain user (in the format username@doaminname) can log in to centos and pass it with Domain user for k
gimmick I have three shared folders in my local home directory, that is, on /home/me/ on my Ubuntu desktop. All of these are set using "Share Options" in Nautilus' right-click menu. The standard Music and Videos folders are configured the same: the "Guest acce
xq10907 After upgrading centos to 7.4, I can't access my samba share, samba version is upgraded to 4.6.2, I join centos to windows domain via realm command, domain user (in the format username@doaminname) can log in to centos and pass it with Domain user for k
if As of this morning, I cannot access the Samba share on the server. I get an "Access Denied" message, whether from a Windows PC or from an Ubuntu laptop. The share has been working for years without any modification to the smb.conffile . I noticed that the S
SHLelieveld Thank you for following my issue and working with me to find a solution. I have a samba server on subnet 172.23.3.55/23 (2.0 -> 3.255) and within that subnet I can access the server. Also, the 172.23.4.0/23 subnet, which is on the same core switch,
shadow warrior I can't access a windows machine via samba service in Ubuntu 16.04. I uninstalled and reinstalled the samba service as follows: sudo apt-get remove samba*
sudo apt-get purge samba*
After doing this, I executed: sudo apt install samba samba-comm
Jason Baker I set up a Samba share that I want to put on a git repository. I've tried googling the best way to use git on a Samba share, but since Samba uses git for development, it seems hard to find any way to do this. What's the best way to do this? Right n
Bishwanath Das In Windows it asks for username and password, while in Ubuntu it asks for username, domain and password. I entered root and local user passwords and it says "cannot access". #======================= Global Settings =======================
[glob
Kay I have a raspberry pi with samba3 (my external HDD is network accessible) And I have ubuntu14.04 on my laptop. For the script I'm working with, I need to access the HDD through the terminal. I tried some things I found in HKSAR such as: sudo mount -t cifs
The Balvenie I read many user questions and blogs about this problem, but nothing solves my problem. I have a Linux CENTOS host with a Windows 10 guest installed in VirtualBox. On Linux, there is a user named "myuser" that shares a directory (777) and is regis
username I have two different LANs in my home network, 192.168.0.1 (modem/switch) and 192.168.1.1 (router). The switch is connected to the modem and it has access to my PC, the 192.168.0.0/24 range. There is also a router attached to the modem that gives wirel
if As of this morning, I cannot access the Samba share on the server. I get an "Access Denied" message, whether from a Windows PC or from an Ubuntu laptop. The share has been working for years without any modification to the smb.conffile . I noticed that the S
shadow warrior I can't access a windows machine via samba service in Ubuntu 16.04. I uninstalled and reinstalled the samba service as follows: sudo apt-get remove samba*
sudo apt-get purge samba*
After doing this, I executed: sudo apt install samba samba-comm
SHLelieveld Thank you for following my issue and working with me to find a solution. I have a samba server on subnet 172.23.3.55/23 (2.0 -> 3.255) and within that subnet I can access the server. Also, the 172.23.4.0/23 subnet, which is on the same core switch,
Follower I have setup a Samba server on CentOS 7.4 and it should be allowed to work in SELinux. I can successfully access the anonymous share on the root filesystem, but cannot access the directory on the mounted NTFS partition. In Win10, I got You do not have
Jason Baker I set up a Samba share that I want to put on a git repository. I've tried googling the best way to use git on a Samba share, but since Samba uses git for development, it seems hard to find any way to do this. What's the best way to do this? Right n