Related
Hong Dajing I have a Windows 10 Pro computer (Creators Edition, build 1703) with Hyper-V installed, and a Win 10 Pro VM (same build). At first everything seemed to work fine when the virtual machine was using the internal virtual switch. I changed it to an ext
B-Rad I've been trying to install a Win7 VM on Hyper-v which is connected to the internet via a Win 8 host. I can't seem to figure out why the virtual machine can't get past the limited connection. Any ideas? B-Rad Not sure why, but all I had to do was disable
Gurmit I'm using Hyper-V for android to run the Visual Studio emulator to test a Xamarin android application. But the emulator can't connect to the database machine on the same network (for making database calls) that my computer can access. I searched a lot o
Gilberts I am using Kubuntu 13 as host and Xubuntu 12 as guest. In the VM network options, I selected NAT, and like 127.0.0.1:23 => 10.0.2.15:22. I can access the internet from the guest, but when I try to SSH to the guest, I get connection refused. Recently I
Rob Methven Background: Our SAS disk failure was part of a RAID 10 array. Unfortunately, when it fails, it also takes its mirrored pair offline in the SPAN, meaning the entire array is unrecoverable. We have backups so no big issues there. We bought a couple o
Rob Methven Background: Our SAS disk failure was part of a RAID 10 array. Unfortunately, when it fails, it also takes its mirrored pair offline in the SPAN, meaning the entire array is unrecoverable. We have backups so no big issues there. We bought a couple o
Karel I'm not very familiar with virtualization. I can use it on Windows 7/8 without issue. Recently, I wanted to try the server: Kaa with VirtualBox on a new Windows 10 laptop. They provide a sandbox environment . So I started. I've managed to install Ubuntu
Karel I'm not very familiar with virtualization. I can use it on Windows 7/8 without issue. Recently, I wanted to try the server: Kaa with VirtualBox on a new Windows 10 laptop. They provide a sandbox environment . So I started. I've managed to install Ubuntu
oshirowanen I have a Ubuntu 18.04 Desktop 64 bithost. On this host, I created one using VirtualBox Ubuntu 18.04 Server 64 bit VM, installed MySQL on it, and created a MySQL user, a database, and a table. I have set the network adapter in this virtual machine t
Helena Raya I'm new to Hyper-V concepts and how they work, so I'm not sure if this is a good question. I have a server with Hyper-V and I connect to a VM (VM1) from Hyper-V. VM1 contains Orchestrator, which will be used to automate some of the jobs associated
Matthias Güntert I want to share a VHDX file attached to my VM (and Win8.1) with the host system. For this, I have enabled advanced features in the VM under the SCSI controller "Activate Virtual Hard Disk Sharing" (translated from German to English). Unfortuna
Matthias Güntert I want to share a VHDX file attached to my VM (and Win8.1) with the host system. For this, I have enabled advanced features in the VM under the SCSI controller "Activate virtual hard disk sharing" (translated from german to english). Unfortuna
Mubashir A. Salam I've been trying to connect an external HDD to a PC for a while now (this HDD is for media content only). I don't want to install this hard drive to a PC, I just want to see what's already stored on the hard drive. I've been seeing other ques
Mubashir A. Salam I've been trying to connect an external HDD to a PC for a while now (this HDD is for media content only). I don't want to install this hard drive to a PC, I just want to see what's already stored on the hard drive. I've been seeing other ques
albert I installed Hyper-V on a Windows 10 laptop and configured an Ubuntu VM on it. The Ubuntu network adapter is connected with the external virtual switch I created. With this configuration, I would expect that the host and guest should get different IP add
albert I installed Hyper-V on a Windows 10 laptop and configured an Ubuntu VM on it. The Ubuntu network adapter is connected with the external virtual switch I created. With this configuration, I would expect that the host and guest should get different IP add
albert I installed Hyper-V on a Windows 10 laptop and configured an Ubuntu VM on it. The Ubuntu network adapter is connected with the external virtual switch I created. With this configuration, I would expect that the host and guest should get different IP add
Dekuji I have created VM instance and MemoryStore instance in the same project but can't connect from VM. # telnet 192.168.1.4 6379
Trying 192.168.1.4...
telnet: connect to address 192.168.1.4: Connection timed out
The VPC that the VM belongs to is designated
Dekuji I have created VM instance and MemoryStore instance in the same project but can't connect from VM. # telnet 192.168.1.4 6379
Trying 192.168.1.4...
telnet: connect to address 192.168.1.4: Connection timed out
The VPC that the VM belongs to is designated
Florina On my host I have Wamp installed and I can connect using PHP or a browser. My client is a virtual machine using Linux and I'm trying to connect to a database on the host to add some entries to it. Here is my code: Connection conn = null;
try {
Stri
Jack In my company, I set up an Azure VM and chose a predefined VNet (associated with the subscription). Then I added inbound rules to allow ports 80, 443 and 3389(rdp) on the newly created NSG. The VM has ubuntu and apache2 installed, and when I browse to the
Jack In my company, I set up an Azure VM and chose a predefined VNet (associated with the subscription). Then I added inbound rules to allow ports 80, 443 and 3389(rdp) on the newly created NSG. The VM has ubuntu and apache2 installed, and when I browse to the
Florina On my host I have Wamp installed and I can connect using PHP or a browser. My client is a virtual machine using Linux and I'm trying to connect to a database on the host to add some entries to it. Here is my code: Connection conn = null;
try {
Stri
Florina On my host I have Wamp installed and I can connect using PHP or a browser. My client is a virtual machine using Linux and I'm trying to connect to a database on the host to add some entries to it. Here is my code: Connection conn = null;
try {
Stri
Jonathan Wood I'm using VMware Workstation 14 Pro and I'm trying to run a virtual machine downloaded from Microsoft and saved to an external USB solid state drive. However, when I try to open that VM (by selecting File | Open and navigating to the path on that
20. miles I'm trying to debug (using Visual Studio) my android app (using ADB) on a virtual machine created with Hyper-V. With this guide ( https://bitbucket.org/chabernac/adbportforward/wiki/Home ), I was able to show Visual Studio (installed in a virtual mac
20. miles I'm trying to debug (using Visual Studio) my android app (using ADB) on a virtual machine created with Hyper-V. With this guide ( https://bitbucket.org/chabernac/adbportforward/wiki/Home ), I was able to show Visual Studio (installed in a virtual mac
Registry edit Note: This is not a standard "Windows activation hell" problem where users get stuck in a loop. Background: I keep an old VM with XP and Office 2003 to support an elderly couple who learned computers later in life and are unlikely to upgrade now.
home network Honey, To simplify our current setup. We have SRV01, SRV02 and SRV03. All Windows Server 2016 with Hyper-v installed and joined to our domain. SRV01 hosts all servers on the same network subnet with the shared folder "\\SRV01\VM-ONLINE-STORAGE\Tes