Related
Order I have a server running kvm that has been upgraded from ubuntu 13.10 to 14.04 and since the upgrade takes hours (less in some cases) client machines (mix of linux and windows, using both virtio, realtek and intel as the network interface)), network probl
pig I know this is risky. I also don't think the reversal will be so difficult. I used virt-manager(remote, using X forwarding) to change the KVM guest's NIC from bridgemode to mode passthrough. Now the host has no network connection. I don't have a GUI on the
User 1050755 I know there are kvm -stdio
A kvm guest can be accessed without setting up a network. But this is slow and can be cumbersome. Is there a better solution? I want to run commands and transfer data. The main problem is that I don't want to run anyth
Nicholas Clark I'm managing an Ubuntu 16.04 based VM (running KVM/libvirt). This server hosts some VMs that are used internally in our department. All virtual machines use our company's Samba server to store various data. During last night's power outage, I fo
Xela A KVM Guest is a Windows computer. I have hooks set up to forward port 3389 to the guest. But RDP fails to connect. RDP is enabled in the guest. Does anyone have an idea? Guest="win"
Guest_ip="192.168.1.3"
if [[ $1 = $Guest ]]
then
if [[ $2 = "st
Ramesh I am trying to get a better understanding of the network settings in the machine. Host settings I have a wireless interface ( wlan0 ) on my host with an IP address of 192.168.1.9. The default gateway for this host is the router that reaches the outside
Archil Labadze Good afternoon, I ordered a dedicated server CentOS 7 from my ISP. 10 public IP addresses were also obtained. There is the following situation: Dedicated server IP is: 149.XX.XXX.29/24 Default Gateway: 149.XX.XXX.1 Other IP addresses: 149.XX.XXX
Ramesh I am trying to get a better understanding of the network settings in the machine. Host settings I have a wireless interface ( wlan0 ) on my host with an IP address of 192.168.1.9. The default gateway for this host is the router that reaches the outside
Big R. Cheng I'm very new to qemu and virtualization and it's a little unclear to me. As far as I know, each vcpu is assigned to a host thread. For example, if there are four vcpus, there are four host threads running each vcpus. Scheduling guest threads depen
Joe My setup is: L0: KVM, friendly L1:Windows 10 L2 Download Virtualbox Download ubuntu Download Bluestacks Download Android Emulator Download symptom: Bluestacks complains that Hyper-V is enabled and won't start, even though it's not in Windows "Additions". O
Jonas I'm using KVM on an ubuntu 15.04 guest, as well as Windows 7 and Windows 10 guests. I have my iPhone connected to my PC and want to redirect it (using virt-manager) to the guest. I always get errors. spice-client-error-quark: Failed to redirect Apple Inc
Bafast I have a KVM host with a software RAID 10 array. A software RAID 10 array is a PV on the host, with only one VG. I'm using several LVs ( data storage for KVM guest .imgfiles ) at the host level. Typically, when adding a new disk to the guest, I create a
Yun-Chih Chen I am trying to use to lm_sensorsdetect host CPU temperature in a KVM guest. In the host, after inserting the x86_pkg_temp_thermal kernel module, the sysfs interface /sys/class/thermal/thermal_zone*/tempwill display the required information. Here
Joe My setup is: L0: KVM, friendly L1:Windows 10 L2 Download Virtualbox Download ubuntu Download Bluestacks Download Android Emulator Download symptom: Bluestacks complains that Hyper-V is enabled and won't start, even though it's not in Windows "Additions". O
Bafast I have a KVM host with a software RAID 10 array. A software RAID 10 array is a PV on the host, with only one VG. I'm using several LVs ( data storage for KVM guest .imgfiles ) at the host level. Typically, when adding a new disk to the guest, I create a
Jonas I'm using KVM on an ubuntu 15.04 guest, as well as Windows 7 and Windows 10 guests. I have my iPhone connected to my PC and want to redirect it (using virt-manager) to the guest. I always get errors. spice-client-error-quark: Failed to redirect Apple Inc
Yun-Chih Chen I am trying to use to lm_sensorsdetect host CPU temperature in a KVM guest. In the host, after inserting the x86_pkg_temp_thermal kernel module, the sysfs interface /sys/class/thermal/thermal_zone*/tempwill display the required information. Here
Jake Charman I'm building a server that will be deployed on a KVM host in the near future. I'm using KVM's virt-manager GUI to build a machine on a personal laptop in KVM. First, I left most of the defaults, including creating it's own network with a NAT adapt
Clay Freeman I'm running a desktop computer tower with Ubuntu Server 13.04 (64bit) installed. The server is configured with libvirt and I use virt-manager to control and configure the VM and virsh. I've been running this setup for a month now and suddenly I'm
kidnapping Newbie warning: I'm completely new to virtualization, so there may be a very simple solution... I'm trying to run a virtual machine with KVM on Ubuntu 14.04.1 LTS as host. For ease of use, I built the vm using vmbuilder. I want the host and guest to
Facebook Facebook logo Sign up for Facebook to connect with Mohammed Ajil I would like to have a network on my server on which to run KVM as a hypervisor. This network will be used for the distributed Jenkins setup. The target topology is as follows: One machi
Chris High I am trying to connect a guest virtual machine to my network using bridging. I've come across some resources online, but they seem to be out of date for either xen or Ubuntu, or they don't seem to be complete. The host is running CentOS 5.5, and I u
Vaporizer Here is what I am trying to achieve: KVM host: Get IP via DHCP ssh connect by hostname (VM-host hostname) Ubuntu Server 14.04 LTS Sitting in a LAN with no internet access There is a physical interface on eth0 Guest: Get IP via DHCP ssh connect by hos
Jake Charman I'm building a server that will be deployed on a KVM host in the near future. I'm using KVM's virt-manager GUI to build a machine on a personal laptop in KVM. First, I left most of the defaults, including creating it's own network with a NAT adapt
Grinding 919 I'm having trouble finding how to limit a VM's network bandwidth. What I've searched online shows that libvirt already includes this functionality, but I can't find it anywhere. Using that virsh editcommand to edit the VM's settings, I still can't
Clay Freeman I'm running a desktop computer tower with Ubuntu Server 13.04 (64bit) installed. The server is configured with libvirt and I use virt-manager to control and configure the VM and virsh. I've been running this setup for a month now and suddenly I'm
kidnapping Newbie warning: I'm completely new to virtualization, so there may be a very simple solution... I'm trying to run a virtual machine with KVM on Ubuntu 14.04.1 LTS as host. For ease of use, I built the vm using vmbuilder. I want the host and guest to
Vaporizer Here is what I am trying to achieve: KVM host: Get IP via DHCP ssh connect by hostname (VM-host hostname) Ubuntu Server 14.04 LTS Sitting in a LAN with no internet access There is a physical interface on eth0 Guest: Get IP via DHCP ssh connect by hos
Facebook Facebook logo Sign up for Facebook to connect with Mohammed Ajil I would like to have a network on my server on which to run KVM as a hypervisor. This network will be used for the distributed Jenkins setup. The target topology is as follows: One machi